• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

• Male Mini Luer Fluid Connectors Male 루어 커넥터
  • Microfluidic chipshop의 Mini Luer chips전용 connectors
  • Maker : Labsmith / USA
• Bonded-Port Connector 접착커넥터
  • 본드를 이용한 chip위에 connector 고정시 사용
  • Bonds to port on chip for capillary-chip interface
  • Compatible with ~1mm port size
  • Material: Ultem®
  • Maker : Labsmith / USA
• Straight 8-channel Luer Chips 8채널 루어 칩
  • Microfluidic ChipShop chips with 8-parallel channels
  • Fluidic interface: Luer
  • Choose material (PMMA or TOPAS) and channel dimensions.
  • Maker : Labsmith / USA
• Straight 4-channel Mini-Luer Chips 4채널 루어 칩
  • Microfluidic ChipShop chips with 4 parallel channels
  • Fluidic interface: Mini-Luer. Choose material (TOPAS or PMMA) and channel dimensions.
  • Maker : Labsmith / USA
• Straight 16-channel Through-hole Chips 16채널 칩
  • Microfluidic ChipShop chips with 16 straight channels
  • Fluidic interface: through-hole
  • Chose material (PMMA or TOPAS) and channel dimensions.
  • Maker : Labsmith / USA
• Cross-channel Through-hole Chips 크로스채널칩
  • Microfluidic ChipShop chips with two perpendicular channels
  • Fluidic interface: through hole (0.5mm holes)
  • Choose material (TOPAS or PMMA) and channel dimensions.
  • Maker : Labsmith / USA
• Cross-channel CapTite microfluidic chip 크로스채널칩-CAPTITE전용
  • Microfluidic ChipShop cross-channel chip with direct connection to LabSmith_s
  • CapTite one-piece fittings (C360-100) and chip reservoirs (C360-405R)
  • Channel dimensions: 75um x 75um x 87.0mm long channel.
  • Over all chip dimension is 95.5mm x 16mm x 1.5mm
  • Material: PMMA
  • Maker : Labsmith / USA
• Needle Connector 니들 커넥터
  • Needle Y and Cross connectors.
  • 27 gauge needle interconnects for low-pressure connection to 0.016" ID flexible tubing
  • Material: Ultem (body) and 316 stainless steel needles
  • Maker : Labsmith / USA
• Breadboard Reservoir Breadboard 저장소
  • 액체를 저장하거나 반응시킬수 있는 저장소
  • Reusable PEEK™ 1.1mL reservoir with cap and four ports for CapTite connectors to 360um capillary or 1/16" tubing
  • Maker : Labsmith / USA
• Standard Breadboard Breadboard
  • uProcess에 모든 제품을 작동시키기위해 필요한 기본 board
  • 4" x 6" platform for mounting your fluid circuit. Suitable for all tubing sizes
  • Maker : Labsmith / USA