Search

Prouduct

MDX-310

고속 냉장 마이크로 원심분리기 Analyzer > Centrifuge > Floor-Top Centrifuge
제품설명
  • 고속냉장 마이크로 원심분리기 (High Speed Referigerated Micro Centrifuge)
  • 4.3 인치 터치스크린 디스플레이
  • 회전속도 : 15,000 rpm
  • 온도 : -9 ~ 35ºC
  • Rack-in-Rotor 시스템
  • Maker : TOMY / JAPAN
연락처
경기본사 : 031-790-1907 (내선2)
대전지사 : 042-824-5167
  • 안전성과 조작성의 향상을 목표로 개발 된 MDX Series
  • 동급 최초 "터치 패널 기능이 있는 4.3 인치 컬러액정 LCD 디스플레이“
  • 컬러 LCD를 채용하여 조작성 향상
  • 대기 중의 소비 전력량을 약 43 % 절감하는 절전 [ECO 모드 탑재]
  • 심플한 디자인과 선명 용이성
  • 안전 어댑터 및 오류 알림 기능
  • 오토 도어락 기능
  • 카본 로터와 수지 랙을 결합한 랙 인 로터 시스템으로 제품성능 향상
                                   User Friendly and Safety Features  
    터치스크린이 있는 직관적인 조작 패널    
     
      운전중 조작 패널이 변경되어 모니터링이 용이합니다.
         
     ● 숫자 키패드 사용 가능   빠르고 쉬운 설정을 위한 6가지
      메모리 기능
     뚜껑 인터록 시스템        손 보호 장치
작동 중 뚜껑이 열리는 것을 전자적으로 잠그고 방지   약 20°와 70° 사이에서 전환 가능
         
                                                                                                                                                                       
 
     안전 어댑터        알림 기능
로터 랙이 로터에서 튀어나오는 것을 방지하기 위한 세이프티 어댑터 장착.  
 연례 자발적 점검 알림

 먼지 표시기

 
     ECO Mode
MX-307과 MDX-310의 소비전력 비교

대기 냉각 중에 모터 팬 구동을 제어하여 전력 소비를 줄입니다.

*MX-310 이전 모델 MX-307 사이의 전력 소비 감소, 이 수치는 개별 제품의
설정 및 성능에 따라 다를 수 있습니다.


 
Specifications
Model MDX-310 MDX-210 MDX-110
     
Maximum Speed 15,000rpm
Maximum RCF 21,890G 20,380G 20,380G
Maximum Capacity 50ml × 4 30ml × 6 2(1.5)ml × 24
Speed Control System Microprocessor feedback control
Drive Motor Induction motor
Data Entry Jog Dial with ENTER key and Touchscreen Numeric keypad available
Temperature Setting Range From -9°C to +35°C (1°C increment)
Speed Setting Range 300 to 15,000rpm (100rpm increments)
RCF Setting Range 10 to Maximum RCF (Less than 300G: 10G increments, Over 300G: 100G increments)
Time Setting Range 10sec to 99min50sec (in 10sec increments) or (Free) for a continuous run
Safety Devices Imbalance detector Over-speed detector
Lid interlock Motor over-current detector
Over-current circuit breaker Lid open / close detector
Overheat / Overcool detector Rotor identification system
Convenient Functions Last run memory Power saving (ECO) mode
Soft Brake function PRE-TEMP function
FLASH (Short spin) function Annual inspection indicator
Memory function (six sets of operating parameters)
Heat exchanger overheat detector Calendar date & time display
Refrigerant HFC R134a (260g)
Power Requirements 1-Phase AC120V 60Hz 15A
1-Phase AC220-240V 50 / 60Hz 10A
Rated Current 120V : 12A
220-240V : 7A
120V : 12A
220-240V : 7A
120V : 11A
220-240V : 6.5A
Dimensions 341 W × 491 D × 823 H mm
(Lid in open position:1138 H, table height:787 H)
Net Weight 62 kg
Accessories Included Operator’s manual × 1copy, Digital Warranty Information × 1copy, Clear storage case for operator’s manual ×
1piece, Rotor fixing knob × 1piece, Caster holder × 2pieces, Drain plug × 1piece, Attaching screw for clear
case × 1piece, Power cord × 1piece, Hexagon wrench × 1piece
         
*  The above specifications show the maximum value of speed, RCF (G) and sample capacity. These values may change according to
the combination of rotor, bucket, adaptor and tubes.
  • NIX-521
  • AX-Series
  • LCX-Series
  • Multi Spin
  • One Spin