Search

Prouduct

AX-Series

저속 냉장 원심분리기 Analyzer > Centrifuge > Floor-Top Centrifuge
제품설명
  • 저속 냉장 원심분리기 (Low Speed Referigerated Centrifuge)
  • 사용자 친화적인 디스플레이와 컨트롤 패널
  • 다양한 로터 선택 옵션
  • 속도 : 최대 10,000 rpm
  • RCF : 최대 11,740G
  • 온도 : -9 ~ 35ºC
  • Flex-Spin System
  • Maker : TOMY / JAPAN
연락처
경기본사 : 031-790-1907 (내선2)
대전지사 : 042-824-5167
  • Mix Bucket, Mix Rack, Multi Rack 으로 다양한 사이즈의 튜브 동시 사용 가능
  • 안전하고 효율적인 원심분리를 위한 Flex-Spin System
  • 손쉬운 로터 탈부착 시스템
  • 사용자 친화적인 디스플레이와 컨트롤 패널
  • 컬러 LED 로 작동 상태 확인 가능
  • 동급 장비 대비 컴팩트한 사이즈
User Friendly and Safety Features
     Mix Bucket & Mix Rack & Multi Rack          
스윙 로터에 15 ml  튜브와 50ml 튜브를 사용 할 시   Bucket for TS-7C Swing-Out Rotor

기존 방식

1세트의 15ml 튜브 버킷/랙과 1세트의 50ml 튜브 버킷/랙이 필요했습니다.


Mix Bucket & Rack

Mix Bucket / Mix Rack을 사용하면 15ml 튜브와 50ml튜브를 함께 사용할 수 있습니다.

  7M5015-1
(Mix Bucket)

(50ml x 1tube + 15ml x 4tubes) x 4
Mix Bucket에는 15ml 튜브와 50ml 튜브를 함께 사용할 수 있습니다.
 = 50ml  = 15ml
  Rack for TS-38C Swing-Out Rotor
  38M-TC0204P
(Mix Rack for Conical Tubes)

50ml x 2tubes + 4 or 15ml x 4tubes x 4
   3810M-14P
   (Multi Rack for Blood Collection Tubes)

   5 ~ 10ml x 14tubes x 4 
                           예를 들어, Mix rack은 (50ml 튜브 1개 + 15ml 튜브 2개) x 4의 튜브 사용이 가능합니다.  
 
 
     더 안전하고 더 효과적인 작동을 위한 Flex-Spin 시스템
안전하고 효과적인 원심분리를 위해 채택된 Flex-Spin 시스템은 샘플튜브의 오차 범위와 아이밸런싱을 허용합니다.
*일부 로터 제외

오존층 파계 계수가 0인 비염소, 오존 친화적 냉매를 채택하였습니다.
     Flex-Spin Drive                                   One-push rotor locking knob  
Flex-Spin 드라이브는 원심분리기의 손상을 최소화하고, impalance protect 시스템을 작동시키지 않으면서 가벼운 불균형을 맞춰주는 유연한 모터 샤프트를 가지고 있습니다.
따라서 샘플간 용량의 가벼운 오차가 허용됩니다.
  손잡이를 가볍게 누르는 것 만으로 로터가 빠르고 확실하게 고정됩니다.
*Some rotors are excepted.

                  
To mount the rotor                                             To dismount the rotor
     
    잠금장치를 샤프트 위에 놓고 빨간 똑딱이를 "딸깍" 소리가 날 때까지 눌러 고정시킵니다.        빨간 똑딱이를 누른 채로 잠금장치를 샤프트로        부터 당겨 빼줍니다.

 
     
 
     Intuitive Display and Control Panel
디스플레이에는 남은 작동 시간, 에러 메시지, 사용중인 로터, 작동 기록 등 다양한 정보가 표시 됩니다. 디스플레이는 영어와 일본어로 설정 가능합니다. (AX-521)

* 위 사진은 실제 동작 시 컨트롤 패널의 디스플레이와 상이할 수 있습니다.
두 가지 색으로 표시되는 LED 디스플레이로, 현재 작동 상태를 한눈에 파악할 수 있습니다.

붉은색 : 로터가 돌아가고 있음
푸른색 : 로터가 멈추어 있음
 조그 다이얼 위, 버튼이 탑재되어, 빠르고 정확한 세팅 변경이 가능합니다.


 
     Compact Design        Three-step acceleration and three-step and natural deceleration
타 대용량 냉장 원심분리기 제품에 비해 컴팩트한 디자인으로, 설치 면적이 한정적인 경우 매우 유용합니다.  
           
 
     Convenient flashing function
간편한 Flash 기능으로 사전 설정된 원심분리 조건으로 작동 가능
 
Environmentally Friendly
     ECO Mode
TOMY AX 시리즈의 새 모델에는 절전 [ECO] 모드가 적용되어 대기 전력 소비를 줄입니다. Power Consumption at ECO mode

[ECO] mode
Electric Power Saving

Patented
절전모드를 활성화 할 경우, 온도 제어 대역을 변경하여 대기시간(standby cooling)의 전력 소비도 줄일 수 있습니다.
ECO모드를 해제한 후 약 3분 30초 내로 설정한 온도로 냉각이 가능합니다.

*작동조건 : 설정온도 4℃, 주변 온도 25℃
전반적인 냉각 효율 증가로 인해, 정상 작동 시 에너지 소비를 대폭 줄일 수 있습니다.

* 측정 조건 : 설정 온도 4℃, 주변 온도 25℃, 원심분리 작동하지 않는 조건
  (로터 정보 : AX-521/AX-321 : TS-37C+350+TC06P)
* 위 기재된 값은 평균 값입니다.

 
Specifications
Model AX-521 AX-511 AX-501
     
Maximum Speed 10,000rpm
Maximum RCF 11,740G
Maximum Capacity 1,536ml (8 × 96 × 2ml DW plate) 1,000ml (4 × 250ml)
Control System Microprocessor control (feedback system)
Drive Motor Induction motor
Drive System Flex-Spin drive system (Direct drive with an automatic alignment function)
Data Entry Jog Dial equipped with an <ENTER> button
Temperature Setting Range From -9℃ to +35℃ (1℃ increment)
Speed Setting Range 100 to 10,000rpm (100rpm increments)
RCF Setting Range 10 to 11,740G (10G increments for the range less than 300G, 100G increments for the range over 300G)
Time Setting Range From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increments
or <F–> for free
Safety Devices Imbalance detector, Lid interlock, Lid open / close detector, Abnormal speed detector,
Over-current circuit breaker, Rotor identification system, Motor over-current detector,
Abnormally high or low chamber temperature detector.
Additional Functions Three-step acceleration characteristics selection, Three memory function,
Three-step deceleration characteristics selection, FLASH (momentary spin) function,
Memory function for last run parameters, BART Code selection, Power saving (ECO) mode
Refrigerant HFC R404A (270g) HFC R404A (260g) HFC R404A (250g)
Rated Current 120V : 12A, 220 / 230 / 240V : 6A 120V : 10A, 220 / 230 / 240V : 5A
Power Requirements 1-Phase 50 / 60Hz AC120V 15A, 1-Phase 50 / 60Hz AC220 / 230 / 240V 8A
Power Consumption(Heat output) 970W (834kcal / h) 960W (826kcal / h) 760W (654kcal / h)
Breaker Rated breaking current 120V : 15A, 220 / 230 / 240V : 7.5A
Protection Against Electric Shock Class I
Dimensions(except protruding portion)  540W × 597D × 858H mm,
(table height; 750H mm)
510W × 567D × 858H mm,
(table height; 750H mm)
462W × 540D × 858H mm,
(table height; 750H mm)
Net Weight 111kg (120V)
116kg (220 / 230 / 240V)
107kg (120V)
112kg (220 / 230 / 240V)
99kg (120V)
104kg (220 / 230 / 240V)
Environmental Requirements  Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%, Atmospheric pressure:700 to 1,060hPa
Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2
Accessories Included  Operator’s manual × 1copy, BART Code table × 1pc, Clear storage case for operator’s manual ×
1pc, Attaching screw for clear storage case × 1pc, Spanner × 1pc, Level gauge × 1pc, Rotor
locking knob × 1pc, Drain plug × 1pc, Power cord × 1pc, Digital Warranty Information × 1copy.
       
*  The above specifications show the maximum value of speed, RCF (G) and sample capacity. These values may change according to the combination of rotor, bucket, adaptor and tubes.
     Swing Out Rotor          Angle Rotors  
From micro tubes to 250ml bottles.   Spinning maximum 10,000rpm (Angle rotors only)
TS-38C
Bucket B438,
Tube Rack 3850-04P
Conical 50ml x 16

Conical 50ml
  CA-16
Conical 50ml x 8
10,000 rpm
11,740 G
   
TS-7C
Bucket
7115-08
Conical
15ml x 32
TS-33C
Bucket B433
250ml x 4
Bucket Cap
Kit B433  
  CA-5
2ml x 24
10,000 rpm
9,390 G
CA-14HS

50ml / 14ml x 4
10,000 rpm
8,500 G (50ml)
7,720 G (14ml)
TS-37C
Bucket B437,
Tube Rack 3715-TC16P
Conical 15ml x 64
TS-41C
Deep-well Plate x 4
  CA-15
2ml x 18 or 0.5ml / 0.2ml x 12
10,000 rpm
8,500 G (2ml) / 6,600 G (0.5ml) / 5,810 G (0.2ml)
This bucket, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety. It adopted a hermetically sealed structure equivalent to bucket or rotor designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.
  • MDX-310
  • LCX-Series
  • NIX-521