Search

Prouduct

Suprema Series

고속 냉장 원심분리기 Analyzer > Centrifuge > Large Volume Centrifuge
제품설명
  • 탁상형 고속 원심 분리기
  • 조그다이얼로 쉬운 조작 가능
  • 직관적 디스플레이
  • 대용량 원심 분리기
  • 연속 스핀 가능
  • 25,23 시리즈: 715W x 794D x 1,017H mm (Height to Operation Table : 869H mm)
  • 21 시리즈: 570W x 794D X 1,018H mm (Heithg to Operation Table: 869H mm)
연락처
경기본사 : 031-790-1907 (내선2)
대전지사 : 042-824-5167
High-Capacity Angle Rotors
     NA-610          NA-400  
1,000ml x 6

7,000rpm / 11,120G
Rotor for :
Supema25
  1,000ml x 6

9,000rpm / 15,220G
Rotor for :
Supema25/23/21
User Friendly and Safety Features
      다중 메모리 기능 탑재, 쉽고 편리한 사용이 가능한 LCD 디스플레이
제어판의 LCD 디스플레이에는 이력 및 메모리 기능 분만 아니라 원심분리기 프로그램의 정보 및 작동 조건에 대한 메모리 설정과 같은 특수 기능이 탑재되어 있습니다.

간단한 메모리 기능으로 각 로터에 대하여 세가지 작동 조건을 설정할 수 있습니다.

최대 99 메모리 세팅을 저장할 수 있습니다.
 
      Acceleration and Deceleration Time
기존 모델과 비교하여 50% 가까이 줄어든 가속 및 감속 시간

     사용자 친화적인 전면 표시부            샘플 온도 디스플레이
전면 표시부 (초록, 빨강, 주황색 선)은 멀리서도 작동 상태를 확인 할 수 있게 합니다.   SUPREMA 시리즈 고속 냉장 원심분리기는 챔버 온도, 로터 유형, 회전 주파수의 데이터를 사용하여 샘플 온도를 설정 온도 부근에서 제어 및 유지하고 각 데이터에서 추정된 값을 실제 샘플 온도로 표시합니다.
    초록색 인디케이터는 시스템이 켜져있을 때 작동합니다.        SUPREMA 25의 옵션 기능
    빨간색 인디케이터는 로터가 인식 되었을 때, 로터가 돌아가고 있을 때 작동합니다.   작동 프로그래밍 기능 : 몇가지 작동 조건은 원심분리 작동 중 프로그래밍 가능하며, 자동으로 순차 실행 됩니다. 이 기능은 다섯가지 다른 조합으로 다섯개까지 저장 가능합니다.

원심 가속 통합기능
연속 회전 가능
    주황색 인디케이터는 에러 발생시 작동하며 관련 에러는 LCD 에 표시됩니다.  
             
      10-step acceleration characteristics and 10-step and natural deceleration characteristics
가속 및 감속의 초기 값은 0에서 500 rpm 으로 설정되어 있지만,
100 rpm 단위로 설정 가능합니다.

      환경과 안전을 위한 디자인

ODP = 0.0인 HFC R404A 는 오존층을 파괴하는 염소를 함유하지 않고 환경에 영향을 줄이기 위해 사용됩니다.

불균형 감지 시스템 : 로터가 균형을 잃거나, 허용 가능한 불균형 값을 넘어선 경우, 자동으로 속도를 줄이고 작동을 멈춥니다.

안전장치 : Lid interlock, Lid Open/Close Detector, Overspeed Detector, Overcurrent Detector(Power switch), Motor Overcurrent Detector, Temperature Error Detector (high or low temperature)
Specifications
Model Suprema25 Suprema23 Suprema21
     
Maximum Speed 25,000rpm 23,000rpm 21,000rpm
Maximum RCF 60,110G 51,420G 46,850G
Maximum Capacity 1,000ml × 6 tubes 1000ml × 4 tubes
Speed Control Microprocessor
Motor Induction Motor
Drive System Direct Drive
Data Entry Jog Dial
Speed Setting Range 0 to 25,000rpm
(100rpm increments)
0 to 23,000rpm
(100rpm increments)
0 to 21,000rpm
(100rpm increments)
RCF Setting Range 0 to 60,110G
(10G increments)
0 to 51,420G
(10G increments)
0 to 46,850G
(10G increments)
Temperature Setting Range -9 to 35°C (1°C increment)
Time Setting Range 0 to 50sec. (10sec. increments) , 0:01 to 9:59 (1min. increment) , 10 to 24hours (1hour increment) , Free
Acceleration / Deceleration Setting Acceleration: 10 steps, Deceleration: 10 steps and Free
Memory Function 3 Memories for each rotor with Memory Keys and 99 Memories with Menu Key
Program Operation Ο
RCF Integrated Operation Ο
Continuous Flow Rotor Ο
Other Function Rotor Speed Automatic Setting with BART Code, Radius Setting, Date and Time Display
Safety Devices Lid Interlock System, Lid Open / Close Detector, Overspeed Detector, Imbalance Detector,
Overcurrent Detector, Rotor Identification System, Motor Overcurrent Detector, Temperature Error Detector
Refrigerant HFC R404A
Power Requirement AC 220 / 230 / 240V, 50Hz, 30A
AC 220 / 230 / 240V, 60Hz, 30A
Rated Current 21A 21A 18A
Power Consumption
(Heat output)
3.3kW (2,840kcal / h) 3.3kW (2,840kcal / h) 2.6kW (2,240kcal / h)
Dimensions W × D × H mm
(Except projection)
715W × 794D × 1,017H mm
(Height to Operation Table: 869H mm)
570W × 794D × 1,018H mm
(Height to Operation Table:
869H mm)
Net Weight 265kg 215kg
Accessories Included Operator’s Manual 1, Digital Warranty Information 1, Inspection Sheet 1, Clear Case 1,
Attachment Screw 1, Level 1, Special Tool for Continuous Flow Rotor Use(for Suprema25) 1, Rotor puller 1
       
*  The above specifications show the maximum value of speed, RCF (G) and sample capacity. These values may change according to the combination of rotor, bucket, adaptor and tubes.